SOLTHERM DA-P BASE COAT

SOLTHERM DA-P BASE COAT

Characteristics

Dispersion base coat single component and glass fibre reinforced base coat paste

SOLTHERM DA-P is designed to apply a mesh reinforced base coat within the SOLTHERM HD ETICS system. It is also suitable to retrofit EPS based ETICS and to renovate masonry walls without thermal insulation. Ensures excellent adhesion to all types of substrates (e.g. wood wool cement and OSB boards, concrete or aerated concrete). Suitable for interior and exterior applications. Reinforcing fibres and special polymer dispersion it contains, provide highly flexible coating, which is resistant to thermal stresses. The adhesive is suitable for exterior thermal insulation composite systems ETICS or continuous insulation systems and to repair and retrofit insulated masonry walls.

Technical data:

  • Application temperature: from +10°C to +25°C
  • Surface temperature: from 10°C to 25°C
  • Bulk density: approx. 1.70 kg/dm3 ±5%
  • Workable consistency (measured on a slump cone): 9.0÷1 cm
  • Diffusion resistance: 0.45÷-0.80 m
  • (all technical data provided for the temperature of +20oC and 65% relative humidity)

Coverage:

  • base coat (single mesh): 2.4-3.5 kg/m2
  • base coat (double mesh): 4.8-7.0 kg/m2
  • levelling the surface: 0.9-1.4 kg/m2
  • recommended base coat thickness: min. 3 mm
Download technical details DOWNLOAD SAFETY DATA SHEET
Delivery termsDelivery terms

You currently have JavaScript disabled. This site requires JavaScript to be enabled. Some functions of the site may not be usable or the site may not look correct until you enable JavaScript. You can enable JavaScript by following this tutorial. Once JavaScript is enabled, this message will be removed.